Setting up a Brick Paver Walkway or Building Brick

The use of Setting up a Brick Paver Walkway or Brick or Pavers to produce a sidewalk or patio area complements a house in a way that is unequaled. It adds a level of quality and beauty to a home entryway that can not be accomplished with either concrete or asphalt. Brick and Pavers likewise can be found in several colors and shapes permitting for distinct color design and patterns to be attained. In addition, installing a Brick or Paver walkway does not necessarily require a pro. With some basic understanding and a reasonably simple pathway strategy, a house owner can carrying out such a project.

The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. The location ought to be dug out a minimum of a foot down, getting rid of all topsoil and clay soil. In addition, string lines ought to be strung on each side of the sidewalk. The string lines indicate the ended up height of the walkway.
As soon as the location has been dug, 3/4" gravel stone ought to be laid in and tamped down firmly. Then 2" of sand, or stone dust should be spread over the gravel. Again the sand/stone dust need to be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline ought to equal the density of the brick or paver.

Now that you have a stable base, position a 1" pipeline or journal board the length of the walkway on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level surface location to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready location. These strips will act as your walkway border and help to keep the stability and shape of the pathway.

The key to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again help preserve the integrity of the walkway.

When developing the walkway, undoubtedly bricks/pavers will require to be cut or split. Unless you desire to buy or lease a pricey wetsaw, I would suggest acquiring an easy brick/paver splitter. It is essentially a chisel with a large end that is the width of the bricks/pavers. To really cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the spot where you wish to break the brick. Utilizing a hammer strike the butt end of the chisel firmly. You may require to do this a number of times. You may get more info also wish to flip the brick/paver over and strike the opposite of the brick utilizing the hammer and chisle. Within one or 2 strikes the brick/paver need to break easily. If your walkway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outside edges with additional sand, and then shovel in the topsoil and pack down strongly.
Spread stone dust over the brand-new pathway and sweep into the fractures. This will complete the interlocking of the bricks and assist to eliminate any weed development.


In addition, setting up a Brick or Paver walkway does not necessarily require a pro. The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a steady base, place a 1" pipeline or journal board the length of the pathway on either side of the sidewalk. These strips will act as your pathway border and assistance to preserve the integrity and shape of the walkway. Inevitably bricks/pavers will need to be cut or divided when building the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *